Cutting tools

All 100

All 100 /Ball nose end mil 17 /Corner radius end mill 17 /End mill for aluminium 16 /High performance end mills 29 /Reamers 1 /Solid carbide drill 4 /Square end mill 16

Z5 HELIX: UNEQUAL HELIX ANGLES 43-45º - R. NECK 1º - CENTRAL COOLANT - HIGH PERFORMANCE

Z1 SQUARE END MILL Aluminium - UNCOATED - Normal Series

Z1 SQUARE END MILL ALUMINUM - UNCOATED - Long Series

Z2 HELICE 45º SQUARE END MILL ALUMINIUM - ZRN COATED - Normal Series

Z2 HELICE 45º SQUARE END MILL ALUMINIUM - UNCOATED - Long Series

Z2 HELICE 45º SQUARE END MILL ALUMINIUM - UNCOATED - Normal Series

Z2 HELICE 45º SQUARE END MILL ALUMINIUM - ZRN COATED - Long Series

Z3 HELICE 45º SQUARE END MILL ALUMINIUM - UNCOATED - Normal Series

Z3 HELICE 45º SQUARE END MILL ALUMINIUM - UNCOATED - Long Series

Z3 HELICE 45º SQUARE END MILL ALUMINIUM - ZRN COATED - Normal Series

Z3 HELICE 45º SQUARE END MILL ALUMINIUM - ZRN COATED - Long Series

Z2 BALL NOSE ALUMINIUM END MILL - UNCOATED - Normal Series

Z2 BALL NOSE ALUMINIUM END MILL - UNCOATED - Long Series

Z2 HELICE 40º BALL NOSE ALUMINIUM END MILL - ZRN COATED - Normal Series.

Z2 HELICE 40º BALL NOSE ALUMINIUM END MILL - ZRN COATED - Long Series

Z3 HELICE 45º CORNER RADIUS ALUMINIUM END MILL - UNCOATED - Long Series

Z3 HELICE 45º CORNER RADIUS ALUMINIUM END MILL - ZRN COATED - Long Series

Z2 SQUARE END MILL - Normal Series

Z2 SQUARE END MILL - Long Series

Z2 SQUARE END MILL - Extra Long Series

Z3 SQUARE END MILL - Normal Series

Z3 SQUARE END MILL - Long Series

Z4 SQUARE END MILL - Extra Long Series

Z4 SQUARE END MILL - Normal Series

Z4 SQUARE END MILL - Long Series

Z6 MULTI FLUTE END MILL - Normal Series

Z6 MULTI FLUTE END MILL - Long & Extra Long Series

Z3-Z4 SEMI-ROUGHING END MILL - Normal Series

Z4 SEMI-ROUGHING END MILL - Long Series

Z2 END MILLS - REDUCED NECK

Z4 END MILLS - REDUCED NECK

Z2 MICRO END MILLS - Without Neck

Z2 MICRO END MILLS - REDUCED NECK

Z2 BALL NOSE END MILL - Normal series

Z2 BALL NOSE END MILL - Long series

Z2 BALL NOSE END MILL - Extra long series

Z4 BALL NOSE END MILL - Normal Series

Z4 BALL NOSE END MILL - Long Series

Z2 BALL NOSE END MILL - REDUCED NECK

Z2 BALL NOSE END MILL - REDUCED NECK

Z2 BALL NOSE END MILL - CONICAL FORM - PENCIL FORM

Z2 BALL NOSE END MILL 1º

Z2 BALL NOSE END MILL - CONICAL FORM - TAPER 1,5º

Z2 ARRAL-TOP: BALL NOSE END MILL

Z2 ARRAL-TOP: BALL NOSE END MILL - TAPER 1º

Z2 ARRAL-TOP: BALL NOSE END MILL - TAPER 1,5º

Z2 BALL NOSE END MILL - HARD CUTTING 70HRC - Normal Series

Z2 BALL NOSE END MILL - HARD CUTTING 70HRC - Long Series

Z2 BALL NOSE MICRO END MILL - WITHOUT NECK - Normal Series

Z2 BALL NOSE MICRO END MILL - WITH NECK

Z2 CORNER RADIUS END MIL - Normal Cutting

Z2 CORNER RADIUS END MILL - Normal Series

Z4 CORNER RADIUS END MIL - Normal Series

Z4 CORNER RADIUS END MILL - Normal Cutting

Z2 CORNER RADIUS END MILL - Long Cutting

Z4 CORNER RADIUS END MILL - Long Cutting

Z2 CORNER RADIUS END MILL - Extralong Series

Z4 CORNER RADIUS END MILL - Extralong Series

Z2 CORNER RADIUS END MILL - SHANK D6

Z4 CORNER RADIUS END MILL - SHANK D6

Z2 CORNER RADIUS END MILL - REDUCED NECK - Long Series

Z4 CORNER RADIUS END MILL - REDUCED NECK - Long Series

Z4 CORNER RADIUS END MILL - REDUCED NECK - Normal Series

Z2 CORNER RADIUS END MILL - 1º TAPER

Z4 CORNER RADIUS END MILL - 1º TAPER

Z2 CORNER RADIUS END MILL - 1,5º TAPER

Z4 CORNER RADIUS END MILL - 1,5º TAPER

Z3 HYPERLINK. UNEQUAL HELIX ANGLES 35º-38ª - ECONOMY

Z4 HYPERLINK. UNEQUAL HELIX ANGLES 35º-38ª - ECONOMY

Z4 HYPERLINK. UNEQUAL HELIX ANGLES 35º-38ª - WELDOM DIN6535 - ECONOMY

Z4 HYPERLINK. UNEQUAL HELIX ANGLES 35º-38ª - SPECIAL SIZES - ECONOMY

Z4 HYPERLINK. UNEQUAL HELIX ANGLES 35º-38ª - REDUCED NECK - ECONOMY

Z4 HYPERLINK. UNEQUAL HELIX ANGLES 35º-38ª - WELDOM DIN6535 - REDUCED NECK - ECONOMY

Z4 HYPERLINK PLUS: UNEQUAL HELIX ANGLES 35º-38ª - MULTIPURPOSE - REDUCED NECK - PREMIUM

Z4 HYPERLINK PLUS. UNEQUAL HELIX ANGLES 35º-38ª - WELDOM DIN6535 - MULTIPURPOSE - PREMIUM

Z4 HYRUX: UNEQUAL HELIX ANGLES 43-35º - MULTIPURPOSE - HIGH PERFORMANCE

Z4 HYRUX. UNEQUAL HELIX ANGLES 43-35º - WELDOM - MULTIPURPOSE - HIGH PERFORMANCE

Z4 HYRUX: UNEQUAL HELIX ANGLES 43-35º - MULTIPURPOSE - R. NECK - HIGH PERFORMANCE

Z4 HYRUX. UNEQUAL HELIX ANGLES 43-35º - WELDOM - MULTIPURPOSE - R. NECK - HIGH PERFORMANCE

Z4 HYRUX TITANIUM: UNEQUAL HELIX ANGLES 43-35º - HIGH PERFORMANCE

Z4 HYRUX TITANIUM. UNEQUAL HELIX ANGLES 43-35º - WELDOM DIN6535 - HIGH PERFORMANCE

Z4 HYRUX TITANIUM: UNEQUAL HELIX ANGLES 43-45º - REDUCED NECK - HIGH PERFORMANCE

Z4 HYRUX TITANIUM: UNEQUAL HELIX ANGLES 43-45º - W. DIN6535 - R. NECK - HIGH PERFORMANCE

Z5 HELIX: UNEQUAL HELIX ANGLES 43-45º - REDUCED NECK - MULTIURPOSE - HIGH PERFORMANCE

Z5 HELIX: U.H.A. 43-45º | REDUCED NECK 1º - MULTIURPOSE - HIGH PERFORMANCE

Z5 HELIX: U.H.A. 43-45º | R. NECK 1º - HIGH PERFORMANCE - MULTI PURPOSE - CORNER RADIUS

Z5 HELIX: U.H. A. 43-35º | REDUCED NECK 1º - HIGH PERFORMANCE - MULTI PURPOSE - CORNER RADIUS

Z5 HELIX: U.H.A. 43-45º - R. NECK 1º - H. PERFORMANCE - MULTI PURPOSE - CORNER RADIUS - COOLANT

Z4 HYPERBALL: BALL NOSE END MILL - UNEQUAL HELIX ANGLES

Z4 HYPERBALL: BALL NOSE END MILL - UNEQUAL HELIX ANGLES - CONICAL 1,5º

TURBO HIGH FEED END MILL - Normal series

TURBO HIGH FEED END MILL - Long series

COUNTERSINKER, 60º

COUNTERSINKER, 90º

Z5 TROCHOIDAL. HIGH PERFORMANCE END MILL - REDUCED NECK

3xD SOLID CARBIDE DRILL - DIN6537K

5xD SOLID CARBIDE DRILL - DIN6537L - INTERNAL COOLANT

5xD SOLID CARBIDE DRILL - DIN6537L

8xD SOLID CARBIDE DRILL - DIN6537L - INTERNAL COOLANT

REAMERS - H7

This post is also available in: Spanish